首页 » L4440-Gateway质粒线虫RNAi表达载体gateway技术兼容-BioVector NTCC保藏中心

L4440-Gateway质粒线虫RNAi表达载体gateway技术兼容-BioVector NTCC保藏中心

  • 价  格:¥5920
  • 货  号:L4440-Gateway质粒
  • 产  地:北京
点击询问我要采购
 竭诚为您服务!
BioVector NTCC典型培养物保藏中心
联系人:Dr.Xu, Biovector NTCC Inc.

电话:400-800-2947 工作QQ:1843439339 (微信同号)

邮件:Biovector@163.com

手机:18901268599

地址:北京

已注册
 

L4440-Gateway质粒


Gateway-modified RNAi feeding vector L4440. Use this vector for Gateway cloning of an RNAi target sequence. A Gateway recombinational cassette was placed into the EcoRV site of vector L4440 to generate this modified plasmid. To facilitate subcloning of a given DNA insert into this plasmid, Gateway recombinational attachment sites should be incorporated into primers used for amplificiation, as outlined in the Invitrogen Gateway manual. (Gateway is a registered trademark of Invitrogen Corporation.)

This plasmid is intended for use exclusively as a teaching resource as part of the Integrated Genomics Discovery-Based Laboratory Course.



L4440


Map图谱


Sequence序列


AACCTGGCTTATCGAAATTAATACGACTCACTATAGGGAGACCGGCAGATCTGATATCATCGATGAATTC

GAGCTCCACCGCGGTGGCGGCCGCTCTAGAACTAGTggatccaccggttccatggctagccacgtgacgc

gtggatccCCCGGGCTGCAGGAATTCGATATCAAGCTTATCGATACCGTCGACCTCGAGGGGGGGCCCGG

TACCCAATTCGCCCTATAGTGAGTCGTATTACGCGCGCTCACTGGCCGTCGTTTTACAACGTCGTGACTG

GGAAAACCCTGGCGTTACCCAACTTAATCGCCTTGCAGCACATCCCCCTTTCGCCAGCTGGCGTAATAGC

GAAGAGGCCCGCACCGATCGCCCTTCCCAACAGTTGCGCAGCCTGAATGGCGAATGGGACGCGCCCTGTA

GCGGCGCATTAAGCGCGGCGGGTGTGGTGGTTACGCGCAGCGTGACCGCTACACTTGCCAGCGCCCTAGC

GCCCGCTCCTTTCGCTTTCTTCCCTTCCTTTCTCGCCACGTTCGCCGGCTTTCCCCGTCAAGCTCTAAAT

CGGGGGCTCCCTTTAGGGTTCCGATTTAGTGCTTTACGGCACCTCGACCCCAAAAAACTTGATTAGGGTG

ATGGTTCACGTAGTGGGCCATCGCCCTGATAGACGGTTTTTCGCCCTTTGACGTTGGAGTCCACGTTCTT

TAATAGTGGACTCTTGTTCCAAACTGGAACAACACTCAACCCTATCTCGGTCTATTCTTTTGATTTATAA

GGGATTTTGCCGATTTCGGCCTATTGGTTAAAAAATGAGCTGATTTAACAAAAATTTAACGCGAATTTTA

ACAAAATATTAACGCTTACAATTTAGGTGGCACTTTTCGGGGAAATGTGCGCGGAACCCCTATTTGTTTA

TTTTTCTAAATACATTCAAATATGTATCCGCTCATGAGACAATAACCCTGATAAATGCTTCAATAATATT

GAAAAAGGAAGAGTATGAGTATTCAACATTTCCGTGTCGCCCTTATTCCCTTTTTTGCGGCATTTTGCCT

TCCTGTTTTTGCTCACCCAGAAACGCTGGTGAAAGTAAAAGATGCTGAAGATCAGTTGGGTGCACGAGTG

GGTTACATCGAACTGGATCTCAACAGCGGTAAGATCCTTGAGAGTTTTCGCCCCGAAGAACGTTTTCCAA

TGATGAGCACTTTTAAAGTTCTGCTATGTGGCGCGGTATTATCCCGTATTGACGCCGGGCAAGAGCAACT

CGGTCGCCGCATACACTATTCTCAGAATGACTTGGTTGAGTACTCACCAGTCACAGAAAAGCATCTTACG

GATGGCATGACAGTAAGAGAATTATGCAGTGCTGCCATAACCATGAGTGATAACACTGCGGCCAACTTAC

TTCTGACAACGATCGGAGGACCGAAGGAGCTAACCGCTTTTTTGCACAACATGGGGGATCATGTAACTCG

CCTTGATCGTTGGGAACCGGAGCTGAATGAAGCCATACCAAACGACGAGCGTGACACCACGATGCCTGTA

GCAATGGCAACAACGTTGCGCAAACTATTAACTGGCGAACTACTTACTCTAGCTTCCCGGCAACAATTAA

TAGACTGGATGGAGGCGGATAAAGTTGCAGGACCACTTCTGCGCTCGGCCCTTCCGGCTGGCTGGTTTAT

TGCTGATAAATCTGGAGCCGGTGAGCGTGGGTCTCGCGGTATCATTGCAGCACTGGGGCCAGATGGTAAG

CCCTCCCGTATCGTAGTTATCTACACGACGGGGAGTCAGGCAACTATGGATGAACGAAATAGACAGATCG

CTGAGATAGGTGCCTCACTGATTAAGCATTGGTAACTGTCAGACCAAGTTTACTCATATATACTTTAGAT

TGATTTAAAACTTCATTTTTAATTTAAAAGGATCTAGGTGAAGATCCTTTTTGATAATCTCATGACCAAA

ATCCCTTAACGTGAGTTTTCGTTCCACTGAGCGTCAGACCCCGTAGAAAAGATCAAAGGATCTTCTTGAG

ATCCTTTTTTTCTGCGCGTAATCTGCTGCTTGCAAACAAAAAAACCACCGCTACCAGCGGTGGTTTGTTT

GCCGGATCAAGAGCTACCAACTCTTTTTCCGAAGGTAACTGGCTTCAGCAGAGCGCAGATACCAAATACT

GTCCTTCTAGTGTAGCCGTAGTTAGGCCACCACTTCAAGAACTCTGTAGCACCGCCTACATACCTCGCTC

TGCTAATCCTGTTACCAGTGGCTGCTGCCAGTGGCGATAAGTCGTGTCTTACCGGGTTGGACTCAAGACG

ATAGTTACCGGATAAGGCGCAGCGGTCGGGCTGAACGGGGGGTTCGTGCACACAGCCCAGCTTGGAGCGA

ACGACCTACACCGAACTGAGATACCTACAGCGTGAGCTATGAGAAAGCGCCACGCTTCCCGAAGGGAGAA

AGGCGGACAGGTATCCGGTAAGCGGCAGGGTCGGAACAGGAGAGCGCACGAGGGAGCTTCCAGGGGGAAA

CGCCTGGTATCTTTATAGTCCTGTCGGGTTTCGCCACCTCTGACTTGAGCGTCGATTTTTGTGATGCTCG

TCAGGGGGGCGGAGCCTATGGAAAAACGCCAGCAACGCGGCCTTTTTACGGTTCCTGGCCTTTTGCTGGC

CTTTTGCTCACATGTTCTTTCCTGCGTTATCCCCTGATTCTGTGGATAACCGTATTACCGCCTTTGAGTG

AGCTGATACCGCTCGCCGCAGCCGAACGACCGAGCGCAGCGAGTCAGTGAGCGAGGAAGC



Bacteria-mediated RNAi--General outline:



1) Place gene of interest between T7 promoters in “double T7” plamsid. (slightly more difficult alternative: Place gene of

interest in hairpin/inverted repeat configuration behind T7 promoter in pBlueScript.)

note: this (and other standard cloning) should be performed in DH5 bacteria or other standard cloning strain--NOT

HT115(DE3) cells.

another note: The double T7 promoter-containing plasmid as well as control plasmids for use in feeding experiments

are availale in the 1999 FireLab vector kit. Information and kit request forms can be accessed through the Carnegie

Web site: http://www.ciwemb.edu/

2) Transform plasmid into competent HT115(DE3) bacterial cells and plate onto standard LB+ tetracycline+antibiotic plates.

(Easy competent cell and transformation protocols below)

note: the HT115 cells were a generous gift from D. Court (NCI).

another note: the HT115(DE3) strain is tetracycline resistant; nonetheless, care must be taken not to contaminate your

bacterial stock. First plate the cells onto TET plates, immediately freeze an aliquot upon receipt, and also freeze any

transformed strains in order to have reliable backup. (see freezing protocol below). In addition, the only reliable way

to verify the presence of the DE3 lysogen is by PCR, since T7 phage will not grow in the RNAseIII- background of

this cell.

yet another note: The HT115(DE3) strain is now available from the CGC. (http://biosci.cbs.umn.edu/CGC/

CGChomepage.htm)

3) Grow up culture from single colony on plates and induce expression of dsRNA using IPTG (induction protocol below).

4) Seed NGM plates with the induced culture. The culture can be used as is (for small plates containing small numbers of

hand-picked worms, eg), or the cells can be concentrated by centrifugation and spotted onto plates (for large plates containing

chunked worms, eg). The ratio of bacteria to worms is important--If the plates starve out, RNAi will not be effective. In

addition, the bacterial lawn should not be allowed to continue to grow. Cells that do grow on plates after induction are

generally cells that have lost the plasmid, cells that have lost the ability to produce T7 polymerase, or cells that are

contaminants. The inclusion of tetracycline in the plates significantly improves the results (the addition of ampicillin also helps

—in the case of amp resistant plasmids) (50ug/ml AMP,12.5ug/ml TET). IPTG included in the plates does not significantly

improve the RNAi phenotypes in my hands, but I usually include it in the NGM plates anyway, especially if the seeded plates

are not going to be used immediately (0.4mM IPTG).

5) Add worms to plate and incubate at appropriate temperature. Worms can be added by hand-picking or by adding chunks

onto wet, freshly seeded plates, or onto plates that have been allowed to dry after seeding. I generally use freshly seeded plates

in my experiments. Older seeded plates containing IPTG can also induce RNAi phenotypes with good success. We observe

phenotypes at all temperatures from 16-25C, although the expressivity and penetrance of the phenotype can vary depending

upon the incubation temperature and gene. Worms grown on dsgfp-plates have a stronger RNAi phenotypes when the plates

are incubated at lower temps (16C or 20C), with ds unc-22, phenotypes more convincing at higher temps (25C). It can take

three days before an RNAi phenotype is observed. Results vary depending on the dsRNA and the worm strains used. Freshly

seeded plates vs older seeded plates is also a consideration.

Quick procedure for making competent bacterial cells using CaCl2:

1) Inoculate overnight culture in LB + antibiotic (TET for HT115(DE3) strain + antibiotic appropriate for any plasmids in

cells) (2-5ml). Shake overnight at 37C.2) Inoculate 25 ml LB + antibiotic with overnight culture, 1:100 dilution. Grow cells to OD595= 0.4. Can grow cells in 50

ml sterile centrifuge tube.

3) Spin cells 10 min 3000 rpm at 4C.

4) Resuspend pellet in 0.5X original volume cold, sterile 50 mM CaCl2 (12.5ml). Resuspend by GENTLY pipetting up and

down a few times with a wide bore pipet--no vortexing.

5) Incubate on ice 30 min.

6) Spin as before at 4C.

7) Resuspend pellet as before in 0.1X original volume CaCl2 (2.5ml). Keep cells cold (4C).

8) Use 50-200 ul for transformation.

Cells can be used as is for up to three days (stored at 4C). The cells can be frozen by: adding glycerol to final concentration

of 10%, rapid freezing on dry ice/etoh, and storing at –80.

Transformation of CaCl2 competent HT115(DE3):

1) Add 50-200 ul competent cells to cold, sterile, polypropylene tube on ice.

2) Add 1 uL plasmid (mini-prep quality is OK) 1-100ng.

3) Incubate on ice/water bath for 30 min.

4) Immerse tube in 37C water bath for 1 min.

5) Incubate tube on ice/water bath for 2 min.

6) Add 1ml sterile SOC media. Incubate 37C with shaking for 1 hour.

7) Plate 10uL, 100uL, 250uL, and remaining culture onto 4 LB + tetracycline + other antibiotic? (plasmid resistance) plates.

Incubate 37C overnight. (These cells grow slowly, allow 36 hours for colony formation.)

Freezing bacterial stocks:

1) Inoculate fresh single colony of bacteria into 2.5 ml LB+ antibiotic(s). Grow to early stationary phase.

2) Pipette 0.25 ml 80% glycerol (sterile) and 0.75 ml culture into a sterile screw-cap freezer tube. Mix.

3) Quick freeze on dry ice/ethanol and store at -80C.

Induction of dsRNA in HT115(DE3) cells + T7 promoter containing plasmid:

1) Inoculate overnight culture of HT115(DE3) + plasmid in LB+antibiotics. Incubate 37C with shaking overnight.

(75-100ug/ml ampicillin for amp-resistant plasmids and 12.5 ug/ml tetracycline.)

2) Dilute culture 1:100 in 2xYT + antibiotics and grow to OD595=0.4. (A 25ml culture is usually enough for a small

experiment ~ 20 small plates.)

3) Induce by adding sterile IPTG to 0.4 mM. Incubate 37C with shaking ~ 4 hours (see note).

4) Spike culture with additional antibiotics (another 100ug/ml AMP and 12.5ug/ml TET) and IPTG (to final total concentration

of 0.8mM). Seed plates using culture as is or concentrate cells by centrifugation as per general protocol.

note: the same parameters which give variable results in protein expression using the T7 promoter system are also variable in

this system. Variables to consider: induction temperature (37C vs 30C), induction time (2hr, 4hr, overnight--although

overnight induction never works for me), concentration of IPTG, induction volume, media (LB vs 2xYT or other medias),

additives to induction media (uracil, lactose,etc), etc. Alterations from this "standard" protocol have not significantly or

reproducably improved the RNAi results for the genes we have tested. In addition, “fresh” cells tend to work best. Bacteria

that have been stored on plates at 4C for a long period of time often lose effectiveness: try streaking a new plate from frozen

cells+plasmid or try retransforming HT115(DE3) with the plasmid of interest.


您正在向 biovector.net  发送关于产品 L4440-Gateway质粒线虫RNAi表达载体gateway技术兼容-BioVector NTCC保藏中心 的询问

点击“立即发送”后,我们将在1个工作日内与您取得联系。